Description
AUSCB is proud to introduce their latest model the ‘SIERRA’ 5W 80CH UHF CB Handheld. Built on the same principles as the AUSCB – easy to use, yet powerful.
Wanted a full power 5W UHF Handheld CB, but didn’t want to spend too much – but wanted something better than the cheapest CB brands available here, that also tend to look a bit plasticky? Didn’t want a 1-2W toy either. The SIERRA may well be for you.
Features:
– 80 Channel UHF CB (476.4250 – 477.4125 MHz)
– 16 Repeater Channels
– 5W and 1W Adjustable Power Levels
– 199 LMRS Channels*
– Smart Battery Management up to 35hrs of typical use & well over 50hrs standby
– Bright and Clear Display
– Rugged and Uncluttered Profile
– Voice Announce
– Channel Lock
– Channel Scan
– Voltage Indicator
– Auto Squelch
– Compact size (body 106mm x 58mm x 38mm)
– Splash Proof
– Low Battery alarm
– Easy to use
– Designed for Australia and AS/NZS Type Approved
Comes with Radio, Battery Pack, Antenna, Belt Clip, Charging Dock, Wall Charger to suit Charging Dock, and a simple and easy to understand manual.
12 Months Warranty on radio from defects in materials or workmanship from date of purchase.
Special mention:
Channel Lock – quick press side key 2 to lock or unlock Channel Control and other Key Functions.
Adjustable Power Level – press and hold side key 2 until the radio announces ‘high power’ or ‘low power’. An H or L will also indicate in the screen
Channel Scan – quick press side key 3 to scan all CB channels (default), which then prioritises the last active scan channel in the scan sequence, so you don’t miss anything on that last channel.
Voltage Indicator – press and hold side key 3 until you see and hear the voltage state of the radio expressed as a percentage.
Bright and Clear Screen – channel number will show on the Display Screen for 10 seconds, before the screen goes blank to conserve battery power. Display will show again if channel is changed or key functions activated. Top key can also be used to turn on or off the display. This does not apply when the scan function is running.
Voice Announce – tells you what the radio is doing when changing the channel or using key functions. Very handy when you can’t see the screen or are vision impaired.
Receiver sensitivity: <0.20uV @ 12dB SINAD (-120dBm). In layman’s terms that means really good, better than standard.
What grabs most peoples attention when they first get the SIERRA Radio is how solid the radio feels in their hands and the build quality. The SIERRA Radio is supported by a full length Aluminium Chassis.
*The SIERRA is also type approved to the Land Mobile Service (licensed private or commercial frequencies) covering 403-480Mhz, which means it has to be held to a higher technical standard than the average CB. Dealer programming of CTCSS/DCS, different key functions and selective scanning can be customised for these LMRS channels.
Approved to Australian Standards:
AS/NZS 4365:2015
AS/NZS 4295:2011
AS/NZS 62368-1
AS/NZS 2772.2:2016; EN/IEC/IEEE 62209-1528:2021 & EN 50566:2017
AS/NZS CISPR32
** Please note that many of the accessories between the AUSCB and SIERRA are not cross compatible. Please choose the correct accessories from the model description.
